镍矿抓斗

我公司生产的镍矿抓斗，主要用来抓取镍矿、铁精粉、红粘土等粘性很强的矿石，由于近来镍矿、铁精粉、红粘土等矿石在被人们广泛使用，因此，许多大港口就存在着这样一个问题，在装卸这此矿石的时候，存在着装卸效率低，抓斗内壁被很多矿石粘着，我公司为了解决这一难题，现已研究并生产出来这种专业抓取很粘的矿石抓斗，原理是：不让镍矿挤压，这样镍矿就不会粘斗体，我司镍矿抓斗是在绳索抓斗的基础上改进，没有斗瓣后颚板。

Our grab nickel production, nickel is mainly used to crawl Hard fine powder, red clay minerals such as highly viscous due to the recent nickel Hard fine powder, red clay and other minerals to be widely used, so Many major ports on the existence of such a problem, in which the ore handling when loading and unloading there is a low efficiency, has been a lot of ore grab adhesive wall, our company in order to solve this dilemma has been studied and produced by such a professional crawl very sticky ore grab, the principle is: grab the lowbeam calculated to increase the adoption of two pieces of solder, including the specific location of board and grab the bucket to create a circular flap, so Open grab discharging, the fight is on board, including the body wall from the top down (no contact with body panels Doo), to stick the body in fighting the viscous wall down, including mine, so, which greatly improved the handling grab the efficiency of ports and factories to solve the problem, which is purpuratus grab a patent, other manufacturers can not be produced.

镍矿抓斗

一种绳索散货抓斗包括上承梁，下承梁，钢丝绳，斗体，滑轮，导向轮位装置，撑杆和开闭斗限位块，1.斗体没有后鄂板，这样减少抓镍矿时对矿的挤压力，2.斗体斗瓣角是圆形的，抓镍矿时不会粘斗，3.斗体通过特殊形状设计和特殊工艺加工达到卸镍矿不粘斗。

Nickel ore grab

A rope bulk grab includes an upper bearing beam, a lower bearing beam, a steel wire rope, a bucket body, a pulley, a guide wheel positioning device, a brace bar and an opening and closing bucket limit block. 1. The bucket body has no rear jaw plate, which reduces the grip The squeezing force on the ore during the nickel ore. 2. The bucket petal angle of the bucket is round, and it will not stick to the bucket when grasping the nickel ore. 3. The bucket body is processed by special shape design and special process to achieve the non-stick bucket of nickel ore. .